Mosaic tiles are sold on paper, in the form of small squares, and this facilitates the process of facing. Before the start of work, the wall should already be prepared: even, clean and primed. Glue for this type of tile is better based on latex -based. It is applied to the wall with a toothed spatula, and on the tiles ordinary even, and if the tile is transparent, then the glue should be applied to two layers so that there are no gaps. Attention! The wrong side of the tile is smeared with glue, but the reverse. Now we settled the sheets of the tiles to the solution, trim and tap it on top of the grater, strengthening and aligning the seams between the sheets.
After about 20 minutes, we wet the paper on the tile with a damp sponge, and when it darkens, we carefully remove. If when the paper is removed, the tile moved, we correct it until the glue froze. So we lay the entire tile, controlling the same seams, and leveling random bumps. The glue will dry out for two days, and then the tile is ready for grouting. We clean the tile with a brush from the glue and the remains of the paper, and apply a special grout mixture to the surface of the entire tile. After 20 minutes, first with a soft rag, and then a slightly damp sponge, remove the excess grout. After complete drying, be sure to wash the tile and polish it to a shine so that a white coating does not form subsequently.