In order to stick the tiles to the ceiling qualitatively, you must first prepare the surface: clean the surface, remove the differences (joints of the plates), apply a primer to the surface. From the glue you can choose any suitable for this type of work, but for the tile to lie even and holds it tightly better used by glue “liquid nails”. At the very beginning of the work, it is necessary to mark the ceiling, that is, using a pencil, draw the ceiling on 4 parts of perpendiculars, which should intersect in the center of the ceiling. By the way, any person can choose or ceilings stretch or glue ceiling tiles.
You need to start work with the center and move to the edges. First we reach the center to the edge of the ceiling, then we return to the center again and begin to glue in a different direction according to the guide depicted marking. We glue the subsequent row of the plate in the same way – from the center to the edge of the ceiling in both sides of the line line, to the already sticker row. As obviously, the last tile is subjected to trimming. Когда проводится наклеивание не нужно забывать о рисунке, чтобы не запутаться на обороте плитки изображены стрелки, которые указывают в каком направлении клеиться панель. At the place of attachment of the chandelier on the panels, you need to cut the holes that will correspond to the hole of the chandelier socket. At the end of the work, the joints of the walls and the ceiling are covered with baguits, with which you can hide bumps and give the ceiling a finish view.