Over time, brick walls give cracks, brick is destroyed. As a result, in the room, dampness may appear, the fungus forms. To avoid all these unpleasant consequences, it is necessary to repair and insulate the old walls. Under the insulation of the facade, many see the fasteners of the insulation with its subsequent plaster and coloring. Of course, if the walls are still in good condition, then this method is quite suitable. Beginners are already destroyed by the walls, be sure to repair. First of all, it is necessary to remove all parts of the destroyed brick, remove the solution that falls out of the seams. After which the surface of the walls is primed.
If you have a foreign car and you cannot find the necessary spare parts when breaking the car? On our site
It is best to use a primer concrete contact. After the primer dries, the wall is plastered with facade glue. Glue is applied to the surface with a spatula and stretched by the rule. Tighten the rule in order for the plane to be even. After drying, the wall is again primed. Several stages of primer are necessary in order not to give a consequence of the fungus a single chance. Then you can fix the insulation itself. It is attached to a special mount in the form of umbrellas, using a punch. Facade glue needs to be close up all the joints between the sheets of insulation. Then a special mesh is glued to the facade glue. Also, the grid needs to be glued until the insulation is installed on the corners of the building. After drying, the surface is plastered, primed and painted.