One of the final stages of repair is wallpaper pasting walls. This is an ordinary situation? And each of us has come across her more than once. Sometimes people make banal mistakes, and then you have to redo the work. Which is always unpleasant. To prevent this situation? In this article we will talk about how to properly glue the walls with wallpaper.
The wallpaper should start pasting the walls with the removal of old wallpaper from the wall. Remove as best as possible. Ideally to completely naked walls. Check the hardness of your wall. To do this, run a hand along the wall. If dust, white plaque and other pollution remains on the skin, then the walls are necessary to wash.
The better you wash the walls, the stronger the wallpaper will be. The most important condition for starting work, the walls should be dry. On wet walls, wallpaper cannot be glued. Your work will be in vain. Prepare the walls for pasting. To do this, smear all large potholes with putty. Apply special soil to the walls, for better contact of the wallpaper sheet with the wall. After drying the soil, you can proceed directly to the pasting.
Expand the roll of wallpaper. Measure the length you need and evenly apply glue to the sheet. Special tinting adhesives allow you to control the uniformity of glue. After drying, such glue becomes completely transparent. Start sticking sheets of wallpaper from the window, in which case the joints will be much less noticeable. Squeeze a sheet of wallpaper on the wall with a special soft spatula or clean rag. Go to the sticker of the second sheet, and so in order. In general, this is a simple job.