Cork wallpapers are a whimsical material that requires pre -processing the surface. Before starting work, you need to make sure the wall was as flat as possible, since after their gluing all the flaws and bumps will be very striking. However, it is not necessary to hardly process the wall. Glue cork wallpapers with special glue. You can also use acrylic glue, which is also suitable for this type of work. The following feature of the work is that the wallpaper cannot be bent or deformed. You can not glue over the angles overlap.
Want to get a good house from a beam, and look for where cheaper? You will like our prices for houses from the beam, you can buy one of our houses in our online store. If you want to know more detailed information, go through the link we specified.
When gluing wallpaper from the roll, after cut into the sheets, you need to let you lie on the floor and straighten up. At this moment, it is worth marking on the wall. After you mark it, you need to proceed directly to the package itself. So it’s better to produce together. This is necessary so that one person presses the sheet on top and the other from below. Glue is applied with a spatula. When gluing, it is important to monitor compliance with the connection at the joints, since gluing one sheet on the other is not permissible.
When using cork wallpapers, it is most important to monitor compliance with the rules for gluing cork wallpapers. This is necessary due to the fact that this type of wallpaper is very fragile and, if used incorrectly, it is not possible to restore them.