The construction of the frame house, like any other, should start with the foundation. When work on its creation is completely completed, you might think about the construction of the walls. First of all, it is necessary to lay a waterproofing material on a completely dry foundation (most often used roofing material). Then the wooden beam is laid, which will become the basis for the frame walls. At first, at the ends of the beam, you need to create recesses, cutting half the thickness of this material that will provide a connection with the profile. To create a hard design, the bars and profiles should be connected with wooden pins.
After all the bars are laid, you need to decide on the number of racks, the fastening of which occurs in the sample of the main bars. The sample is carried out by cutting off the upper bars of the hollow, which will correspond to the width of the rack. Then, racks are installed in the obtained grooves, the height of which should be thought out and adjusted in advance. Also, even before installation on the tops of the racks, you need to cut the grooves in order to subsequently connect them to the upper bars. The stiffness of the structure will give nails and temporary brackets. The racks should be fixed as smooth as possible, which can be checked with a plumb line. On the built frame you can nail trim boards, leaving holes for future windows and doors.