To speed up the repair process in the toilet, it is best to use PVC panels. This will significantly reduce the time for repair work. First you need to make all the necessary measurements taking into account all protrusions and communications. This will allow you to correctly calculate the consumption of the necessary materials. To date, panels of size 0.38 and 0.25 meters are produced. Knowing these characteristics, you can accurately calculate the required amount of material. In addition to the panels, it is necessary to purchase a starting and finish profile.
After the purchase of the necessary material, you can proceed to the installation of the frame. For this, wooden rails are used, which are pre -processed by a special composition from the appearance of mold and fungus. For each of the walls, as a rule, four rails with an interval of 50 centimeters are attached to each of the walls. Fastening is carried out through dowels and screws. After that, the starting location for the mounting of the panels is determined and the start profile is installed. Next, the first panel is installed. The panel is mounted using a construction stapler or small nails. Thus, subsequent panels are installed. Holes for communication are cut out using a construction knife.