Consider some practical advice that allow rags to restore order in the bathroom without significant costs of material resources and calling expensive specialists. If the enameled surface of the sink or bathtub is yellowed, it should be wiped with vinegar, into which several tablespoons of salt should be added. When chips appear on the bath, they can be covered with the following composition: epoxy resin mixed with a filler in a ratio of two to one. As for the filler, for these purposes, talcum, dry enamel powder is perfect, was whitewashed in powder. We draw your attention to the fact that before applying the solution should stand within ten days. And only after this period, the surface purification of rust and degrease with gasoline or acetone, you can cover the bath with epoxy with the resulting composition. Do not forget to add a hardener before applying, and in a week polish with a small skin. By the way, buy an apartment in Spain inexpensively – a completely real option today. In addition, you can restore the bath by mixing a nitroemal with a super -chain glue in a ratio of one to one. As in the first case, before applying the solution, the bathroom must be degreased. Rubbing the composition into the surface is carried out by a swab, carefully impregnated glue with paint. It is advisable to apply four layers, each of which needs to give a day to harden.